Setting Temperatures

For the thermostat to work effectively it is important that you set your highest and lowest temperature.

There is 3 symbols that must be set the sun the moon and the case.

The sun is the symbol for your comfort temperature, this is the temperature you require when you are using the room.

The Moon is the symbol for your economy temperature, this is the temperature used when the room is vacant or in night time mode.

The case symbol is usually used in manual mode when the room is not going to be used for some time i.e. in summer or when you are on holiday.

Step 1

Click button 2 until the sun displays and the temperature starts flashing (do not press and hold as this will take you into the Calibrate Thermostat page.)

Using the arrow up or down (button 5 or 6) set the temperature to the the temperature you desire while you are in the room. The comfort temperature is usually between 20 - 22 in air only or air and floor (23-25 in floor only mode).

Step 2

Click button 2 until the moon displays and the temperature starts flashing,

Using the arrow up or down (button 5 or 6) set the temperature to the temperature you desire while the thermostat is in economy mode. The economy temperatures are usually set between 16 - 18.

Step 3

Use the same method as in step 1 and 2 for the case which is normally set between 5 - 7.

Simply allow the programmer to revert to its original display and the temperatures are now set for use in automatic mode.