Solar water heating with newbuilds

Solar water heating kits without cylinder

Retro fit solar kits

If you have a solar cylinder and have not yet got a solar system to heat the water then the kits below are what you are looking for.

The kits include everything you need for a successful installation except for the pipework and cylinder.

Standard solar kit for 2 bedroom house/flat - No Cylinder
£943.22 + VAT Buy Online	This kit is the standard kit for a domestic 2 bedroom house that includeds the following. 1 x 10 tube collector, tubes are 58mm x 1.8m (panel W 1.8m H 2m) 1 x Pump station with TPRV, expansion vessel connector & flow reg. 1 x Standard Controller for solar including 3 sensors 1 x Expansion vessel for solar array 1 x Expansion Vessel bracket and hose 1 x Set of roof fixing brackets (slate or pantile) 1 x Tundish 15mm to 22mm 1 x Glycol solar fluid (20 Litres)
The above kit comes with all the items you need to connect to an existing 2 coil solar cylinder. This kit is suitable for cylinder capacities of 100 - 150 Litres based on the panel being south facing. The cylinder above is for illustration only and not part of the kit.

Standard solar kit for 3/4 bedroom house - No Cylinder
This kit is the standard kit for a domestic 3/4 bedroom house that includeds the following. 1 x 22 tube collector, tubes are 58mm x 1.8m (panel W 1.8m H 2m) 1 x Pump station with TPRV, expansion vessel connector & flow reg. 1 x Standard Controller for solar including 3 sensors 1 x Expansion vessel for solar array 1 x Expansion Vessel bracket and hose 1 x Set of roof fixing brackets (slate or pantile) 1 x Tundish 15mm to 22mm 1 x Glycol solar fluid (20 Litres)	£1212.99 + VAT Buy Online
The above kit comes with all the items you need to connect to an existing 2 coil solar cylinder. This kit is suitable for cylinder capacities of 180 - 250 Litres based on the panel being south facing. The cylinder above is for illustration only and not part of the kit.

solar kit for 4/5 bedroom house - No Cylinder
£1572.22 + VAT Buy Online	This kit is the standard kit for a domestic 3 bedroom house that includeds the following. 1 x 22 tube collector, tubes are 58mm x 1.8m (panel W 1.8m H 2m) 1 x 10 tube collector, tubes are 58mm x 1.8m (panel W 0.98m H 2m) 1 x Deluxe dual line pumpstation 1 x Vision Controller for solar including 3 sensors, 3 outputs 1 x Expansion vessel for solar array 1 x Expansion Vessel bracket and hose 1 x Set of roof fixing brackets (slate or pantile) 1 x Tundish 15mm to 22mm 1 x Glycol solar fluid (20 Litres)
The above kit comes with all the items you need to connect to an existing 2 coil solar cylinder. This kit is suitable for cylinder capacities of 280 - 350 Litres based on the panel being south facing. The cylinder above is for illustration only and not part of the kit.