Latest Allbrite news
-
2012/05/16 14:05
Wind turbines blow away utility bills
A North Wales businessman who built a 21st century house to obliterate his utility bills has moved a step closer with the erection of three wind turbines in a field near his Flintshire home.
The 8 metre high structures don’t require planning permission and ...
Evacuated Tube Solar Panels
Evacuated tube solar vacuum panels are highly efficient and easy to install as they can be assembled on the roof.
Allbrite's solar evacuated tubes are the highly efficient 58mm diameter tubes using heat pipe technology, this means that no fluid runs through the tubes, instead heat is collected by a super conductor rod and transported into the manifold heat exchanger.
Less glycol liquid is used meaning that the water is heated up quicker by the solar panels and transported to the heat exchange coil in the solar cylinder.
Highlights of the solar evacuated tubes;
- Highly efficient 58mm diameter evacuated tubes (58mm Ø x 1.8m)
- Each tube has an output capability of 104 watts
- Comes in easy to manage packaging
- Easy to construct with only 4 bolts (supplied)
- Only has 2 plumbing connections (22mm)
- All tubes will push fit into the manifold, no special tools required
- Easy clip retainer boots to hold tubes in place
- Powder coated aluminium manifold casing (Grey)
- 10 Year manufacturer warranty
- All collectors have solar key mark certification
It is important to size solar evacuated tube panels correctly to match your dwelling and solar cylinder size, as a rule of thumb each tube will heat 8 - 10 Litres of water if the panel is South facing on a pitched roof, with this in mind we would recommend 22 tubes for a 210 Litre solar cylinder.
Evacuated tube solar panels are also ideal for solar heating your swimming pool, and can cut your heating bills by more than half.
Technical Data
Absorption Co efficiency > 94%Absorber : Aluminium Nitride
Power Output : 1280 W /M2
Power Per Tube : 104 W
Freezing Resistance : -35 °C
Stagnation Temperature : 210 °C
Manifold
Working Pressure : 6 BarFlow Rate : < 130 L/hr
Included in panel kit
Stainless steel side rails
High efficiency tubes (58mm Ø x 1.8m)
Insulated heat exchange head
Slide rail for fixing feet and the required quantity of plastic fixing feet
Instruction manual, fixing bolts and thermal conduction past
Optional Extras
‘A’ frame for flat roof installationRoof anchors for tile or slate roof
